How To Switch off Your Water Main In an Emergency Situation

Get A Free Quote

Are you trying to locate ideas about How to Turn off the Water for Plumbing Repairs?

If you try to close the water off to your fixtures by utilizing an angle quit and that doesn't function you will have to close of the water main to make your repair work. There are additionally many other factors you could need to shut the water pipe like repairing frozen pipelines, fixing leaks, replacing components or taps.
Many people are not conscious that they also have a water pipe valve right in their own residence and also just call a plumber of never end up doing the fixing until things get truly negative because they just do not know that closing the water pipe is actually easy.
The most typical locations a water pipe will certainly be located in house is in your boiler room, cellar, or a removed panel in an area for your home.
Once you find the water main you will just transform the shutoff clockwise to close all the water off in your house until you have finished the repair work. Some houses will certainly enjoy shutoff with a bar that you can draw as opposed to turn to shut the water off.

How to Find and Shut Off Main Water Shutoff Valve

Where is the main water shutoff valve located?

This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.

How to Turn Off Main Water Valve

Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.

If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.

Where are the isolation valves?

Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.

Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.

Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.

Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/

I came across that blog posting on How to Turn Off Water To House and Prevent Damage when doing a search on the internet. Loved our entry? Please share it. Help another person check it out. I treasure reading our article about How to Turn Off the Water in an Emergency.

Get Quote